How Can You Prepare Your Home Exterior for Painting?
If you’re planning to sell your home, redoing or touching up your exterior painting is a sensible project to you to increase your home’s curb appeal. Painting your home’s exterior isn’t as easy as just putting in a coat of paint. When you wish to do it well, the procedure begins with prepping your house for the project. Though every exterior type has its distinct details, we will be concentrating on discussing wood exteriors. The following steps might involve a bit of physical labor but rest assured that they are actually easy to do and they can usually be done in one day if you have an average-sized house.
Secure your working site
Before you start, make sure to cover your decorations, shrubberies, and grasses near your project site to keep them from any hazards, fresh paint, and falling chips. You can opt to lay down a tarpaulin that will help catch byproducts and excess if they fall. This will help you minimize your after-cleaning that you need to do after your project is done.
Wash the exterior well
Any debris, grime or dirt that can be observed on your exterior once the paint will go on would be covered below it. This can make a disturbance, which can ruin the top coat’s lifespan and its appearance. An extendable brush and a common garden hose with a spray nozzle can remove a particular level of dirt. However, you must think about using a pressure washer if your exterior’s surface has stubborn dirt and spots. Regardless of which situation you’re in, you should still be mindful to not spray it directly to the wood’s damaged sections.
Chipped paint should be scraped off
The next thing to do is to utilize a paint scraper for you to eliminate any flakes or chips that weren’t removed during the first step. Though you don’t actually need to remove every scrap of paint before starting the project, you have to guarantee that the new paint has a flat and even surface to attack onto as you start applying it. Put the scraper’s edge at a steep angle that’s almost parallel to the wood’s surface and push it gently with the grain to remove the chips off. You can also lay down a tarp to catch the excess paints once they fall. Make sure to wear goggles or glasses while doing so.
Replace window putty and caulking
Scrape away old putty and caulk around the trimmings, windows, and doors. Change the removed sealants and ensure to be totally dry before you start painting near them.
Fix marred areas
Replace and eliminate damaged wood planks. For minimal damages, you could utilize a surface repair compound as long as it’s intended to be used outdoors. In both cases, sand the fixed areas and don’t forget to apply a primer coating.
Be prepared to paint
After doing all of the steps above, your property is now prepared to be painted with a fresh coat of paint. But, if you are looking for a company that offers Erie house painting services, never hesitate to call us right away.
Recent Comments